Change background image
Marquel

Tech Support

Forum upgraded to a latest version with alot of features... thanks for your patient

Like this post? OldestAfter all

Genju

Thu Aug 30, 2018 8:26 am

#1
  • Genju

Genju



Forum  Owner
Points : 246558
Age : 34
Gender : Male
Join date : 2011-10-22
Windows 10 100% disk usage in Task Manager [SOLVED] Empty Windows 10 100% disk usage in Task Manager [SOLVED]

[size=44]Windows 10 100% disk usage in Task Manager [SOLVED][/size]

By Sophie Luo – Last Updated: 1 month agoin [Only mods are allowed to see this link][Only mods are allowed to see this link]Tags: [Only mods are allowed to see this link][Only mods are allowed to see this link][Only mods are allowed to see this link]
[You must be registered and logged in to see this image.]
[size=37]If your Windows 10 Task Manager shows 100% disk usage, something is causing your hard drive to over-work. Your computer is now so slow it’s almost impossible to use, and you’re probably wondering what you did wrong. The answer is, nothing! This problem can occur all by itself. But the good news is, it’s usually not a hard problem to fix.

[size=42]8 fixes for 100% disk usage on Windows 10[/size]

[size=37]Here are a few fixes that have helped other users resolve their Windows 10 100% disk usage problem. You may not need to try them all; just work your way down the list until you find the one that works for you.[/size]
[/size][list="padding-right: 0px; padding-left: 40px; margin: 24px 0px; box-sizing: border-box; list-style-position: outside; list-style-image: initial;"]
[*][Only mods are allowed to see this link]
[*][Only mods are allowed to see this link]
[*][Only mods are allowed to see this link]
[*][Only mods are allowed to see this link]
[*][Only mods are allowed to see this link]
[*][Only mods are allowed to see this link]
[*][Only mods are allowed to see this link]
[*][Only mods are allowed to see this link]
[/list]



[size]

[size=42]Fix 1: Disable Windows Search[/size]

[size=37]To determine if Windows Search is causing your 100% disk usage problem, the first thing you should do is [Only mods are allowed to see this link], and see if your computer speeds up. If it does, you can [Only mods are allowed to see this link]. [/size]

[size=40]Temporarily disable Windows Search[/size]

[size=37]Windows Search is what makes searching files on your PC much faster. If you don’t use it at all, or you have another search app, you can disable it completely. Disabling this service will stop the indexing of all files. But you will still have access to search, which will take longer time.[/size]
[size=37]Here’s how to temporarily disable Windows Search and find out if it’s the cause of your 100% disk utilization problem. (Note that Windows Search will start again when you restart your computer.)[/size]
[size=30]1) On your keyboard, press the [size=30]Windows logo key [/size][You must be registered and logged in to see this image.][size=30] and [/size][size=30]X[/size][size=30] at the same time, then select[/size][size=30] Command Prompt (Admin)[/size][size=30]. [/size][/size]
[You must be registered and logged in to see this image.]
[size=30]2) Click [size=30]Yes[/size][size=30] at the User Account Control window prompt. [/size][/size]
[You must be registered and logged in to see this image.]
[size=37]3) A mostly black window will then display. This is the command prompt window. In this window, type in the following command: [/size]
[size=36]net.exe stop "Windows search"[/size]
[size=37]4) Hit Enter on your keyboard. [/size]
[You must be registered and logged in to see this image.]
[size=37]Check to see if your disk usage and the performance of your computer improve. If they do, you should permanently disable Windows Search as described below. If not, move on to [Only mods are allowed to see this link]. [/size]

[size=40]Permanently disable Windows Search[/size]

[size=37]If you discovered that Windows Search is causing your 100% disk usage error in Windows 10, you can permanently disable Windows Search:[/size]
[size=37]1) Press Windows logo key + R at the same time, and type in services.msc. [/size]
[You must be registered and logged in to see this image.]
[size=37]2) Locate Windows Search option, double click it to enter its Propertieswindow. [/size]
[You must be registered and logged in to see this image.]
[size=37]3) Change the Startup type to Disabled. Then click Apply and OK to save your change. [/size]
[You must be registered and logged in to see this image.]
[size=37]4) Check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem![/size]
[You must be registered and logged in to see this image.]
[size=37]If the 100% disk usage problem persists, try the next method, below.[/size]
[/size]

[size]

[size=42]Fix 2: Update your device drivers[/size]

[size=37]If the steps above don’t resolve your 100% disk usage problem in Windows 10, it may be caused by a device driver. [/size]
You can automatically update all your device drivers to the latest correct version with [Only mods are allowed to see this link].
[size=37]Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. [/size]
[size=37]You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):[/size]
[size=37]1) [Only mods are allowed to see this link] and install Driver Easy. [/size]
[size=37]2) Run Driver Easy and click Scan Nowbutton. Driver Easy will then scan your computer and detect any problem drivers.[/size]
[You must be registered and logged in to see this image.]
[size=37]3) Click the Update button next to any flagged device to automatically download and install the correct version of that driver (you can do this with the FREE version).[/size]
[size=37]Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the [Only mods are allowed to see this link] – you’ll be prompted to upgrade when you click Update All).[/size]
[You must be registered and logged in to see this image.]
[size=37]4) Check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem![/size]
[You must be registered and logged in to see this image.]
[/size]

[size]

[size=42]Fix 3: Disable SuperFetch[/size]

[size=37]SuperFetch helps to decrease boot time and make must-load programs more efficiently. However, it has been identified as a potential cause of disk performance issues in Windows 8 and later versions of Windows, including Windows 10. Here’s how to stop this service:[/size]
[size=37]1) On your keyboard, press Windows keyand X at the same time, then chooseCommand Prompt (Admin).[/size]
[You must be registered and logged in to see this image.]
2) Click Yes at the User Account Control prompt. 
[You must be registered and logged in to see this image.]
[size=37]3) The command prompt will once again display. Type in the following command: 
[/size]
[size=36]net.exe stop superfetch[/size]
[size=37]4) Hit Enter on your keyboard. 

[You must be registered and logged in to see this image.][/size]
[size=37]5) Wait for a few minutes to see if your computer starts performing better. Or check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem![/size]
[You must be registered and logged in to see this image.]
[size=37]If the 100% disk usage problem persists, try the next method, below.[/size]
[/size]

[size]

[size=42]Fix 4: Perform a disk check[/size]

[size=37]1) On your keyboard, press Windows keyand X at the same time, then chooseCommand Prompt (Admin). [/size]
[You must be registered and logged in to see this image.]
2) Click Yes at the User Account Control prompt. 


[You must be registered and logged in to see this image.]
[size=37]3) The command prompt will once again display. Type in the following command:[/size]
[size=36]chkdsk.exe /f /r[/size]
[size=37]4) Hit Enter on your keyboard, then typeY to confirm that you’d like to perform the disk check the next time you restart your computer. Please make sure you have closed all of your applications first.[/size]
[You must be registered and logged in to see this image.]
[size=37]IMPORTANT: Disk check will start the next time you boot your PC and it might take some time to complete (could be a day for some). If, when you restart, you don’t have time to wait for the disk check to complete, you can skip it. You’ll need to reschedule it again, as described above, though. [/size]
[size=37]5) Once you’ve completed the disk check, check your computer’s disk usage again: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem![/size]
[You must be registered and logged in to see this image.]
[size=37]If the 100% disk usage problem persists, try the next method, below.[/size]
[/size]

[size]

[size=42]Fix 5: Reset Virtual Memory[/size]

[size=37]Virtual memory can be considered an extension of your computer’s physical memory. It’s a combination of RAM and a portion of your hard drive. When the RAM isn’t enough to perform a task, Windows will temporarily store files in virtual memory, then swap them back to RAM when required. [/size]
[size=37]To reset virtual memory:

1) On your keyboard, press Windows keyand Pause/ Break key at the same time. Then choose Advanced System Settingson the left panel.[/size]
[You must be registered and logged in to see this image.]
[size=37]2) Go to the Advanced tab, then click Settings. [/size]
[You must be registered and logged in to see this image.]
3) Go to the Advanced tab again, and choose Change… in the Virtual memory section. 
[You must be registered and logged in to see this image.]
4) Ensure the Automatically manage paging file size for all drives checkbox isNOT ticked. 
[You must be registered and logged in to see this image.]
5) Select your windows drive (the hard drive or partition that has Windows installed on it – usually C:), and enter an Initial size and Maximum size for your virtual memory:
[/size]

  • Initial size – This value varies, depending on your computer. If you’re not sure what value to use, just enter whatever the number is in the Recommended category. 
  • Maximum size – Don’t set this value too high. It should be about 1.5 times the size of your physical RAM. e.g. A PC with 4 GB (4096 MB) of RAM should have no more than about 6,144 MB virtual memory (4096 MB x 1.5).

[size]
Once you’ve entered your virtual memory values, click Set, then click OK to continue. 
[You must be registered and logged in to see this image.]
6) Clear all your computer’s ‘temp’ files. On your keyboard, press Windows key and R at the same time, then in the Run form, type temp and hit Enter. This will invoke Windows Explorer with your Temp folder open, showing you all the temp files on your computer. 
[You must be registered and logged in to see this image.]

[size=37]7) Select all the files in the Temp folder and delete them. [/size]
[You must be registered and logged in to see this image.]
[size=37]Cool Check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem![/size]
[You must be registered and logged in to see this image.]
[size=37]If the 100% disk usage problem persists, try the next method, below.[/size]
[/size]

[size]

[size=42]Fix 6: Disable Antivirus Software temporarily[/size]

[size=37]If you’ve installed antivirus or anti-malware programs such as Norton, Kaspersky, AVG, Avast Behavior Shield or Malwarebytes, you should temporarily turn them off or disable them to see if they’re causing your disk usage problem. [/size]
[size=37]Please see your antivirus software’s documentation to learn how to disable it. You might also find these links useful: [/size]
[/size]

  • [Only mods are allowed to see this link]
  • [Only mods are allowed to see this link]
  • [Only mods are allowed to see this link]

[size]
[size=37]Note that Microsoft has its own default anti-malware, Windows Defender. It’s automatically enabled even if you also have other antivirus applications installed. Even if you disable your other antivirus programs, Windows Defender is always there for you during that certain time range. So, no need to worry too much about temporarily turning antivirus off. [/size]
[size=37]Once you’ve disabled your antivirus, check your computer’s disk usage again: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve found the problem, and you should contact the vendor of your antivirus software to see if they can provide some help.[/size]
[You must be registered and logged in to see this image.]
[size=37]If the 100% disk usage problem persists, try the next method, below.[/size]
[/size]

[size]

[size=42]Fix 7: Change your Google Chrome & Skype settings[/size]

[size=37]For some Windows 10 users, a particular combination of Skype and Google Chrome browser settings causes the 100% disk usage problem in Windows 10. Here’s how to fix those settings (note that the wording on different versions of Chrome could be slightly different): [/size]
[size=37]1) In Google Chrome, click the three-dot icon at the top right corner and choose Settings. [/size]
[You must be registered and logged in to see this image.]
[size=37]2) Scroll down to the bottom of the page and click Advanced. [/size]
[You must be registered and logged in to see this image.]
[size=37]3) In the Privacy and Security category, make sure  Use a prediction service to load pages more quickly is turned off. [/size]
[You must be registered and logged in to see this image.]
[size=37]4) Make sure that your Skype is not running. 

5) In Windows Explorer, go to C:\Program Files (x86)\Skype\Phone\. [/size]
[You must be registered and logged in to see this image.]
[size=37]6) Right-click Skype.exe and select Properties. [/size]
[You must be registered and logged in to see this image.]
[size=37]7) Go to the Security tab and select Edit. [/size]
[You must be registered and logged in to see this image.]
[size=37]Cool Click ALL APPLICATION PACKAGESand tick the Allow checkbox for Write. Then click Apply, then OK to save your change. [/size]
[You must be registered and logged in to see this image.]
[size=37]9) Check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem![/size]
[You must be registered and logged in to see this image.]
[size=37]If the 100% disk usage problem persists, try the next method, below.[/size]
[/size]

[size]

[size=42]Fix 8: Fix your StorAHCI.sys driver[/size]

[size=37]Note: A million thanks to our warm-hearted reader Javier for the following solution.[/size]
[size=37]The Windows 10 100% disk usage problem might also be caused by some Advanced Host Controller Interface PCI-Express (AHCI PCIe) models running with the inbox StorAHCI.sys driver due to a firmware bug. [/size]
[size=37]Here’s how to determine if this is your problem and fix it:[/size]
[size=37]1) Open Device Manager by pressing Windows logo key and X at the same time to choose Device Manager. [/size]
[You must be registered and logged in to see this image.]
[size=37]2) Expand the IDE ATA/ATAPI Controllers category, and double-click the AHCI controller. [/size]
[You must be registered and logged in to see this image.]
[size=37]3) Go to the Driver tab and click Driver Details. If you can see storahci.sysstored in a path of system32 folder, then you are running the inbox AHCI driver. [/size]
[You must be registered and logged in to see this image.]
[size=37]4) Close the Driver Details window and go to Details tab. From the drop-down menu, select Device Instance Path. Make note of the path, starting from VEN_. [/size]
[You must be registered and logged in to see this image.]
[size=37]5) Type regedit in the search box of Startpanel, then hit Enter on your keyboard to run Registry Editor. Then go to: 

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ \\DeviceParameters\InterruptManagement\MessageSignaledInterruptProperties
[/size]
[size=37]The  here refers to the name you see from step 2). [/size]
[size=37]The  differs on different machines. [/size]
[You must be registered and logged in to see this image.]
[size=37]6) Double click the MSISupported key and change the value to 0. [/size]
[You must be registered and logged in to see this image.]
[size=37]7) Restart your computer after the change, then check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem![/size]
[You must be registered and logged in to see this image.]
[size=37]If the 100% disk usage problem persists, try the next method, below.[/size][/size]

Reply by Facebook